PELICAN KAYAKEXPLORE THE WATER
Pelican · Fishing · sit on top

Pelican Catch 110HDII

Pedal propulsion, with a rudder and a fishing layout.

The Catch 110HDII is the pedal-drive model in this selection. A HyDryve II system and rudder controls distinguish it from the paddle-powered Catch Classic and Mode kayaks. An Ergocast G2 seat sits between the front and rear storage areas.

Compare this model View specifications
Pelican Catch 110HDII kayak, supplied product photograph
Model shown for reference. Color and fitted accessories may differ from SKU KRP11P104-00.
Length
10 ft 6 in
320 cm
Width
34 in
86.4 cm
Published weight*
67 lb
30.4 kg
Maximum load
350 lb
158.8 kg

The layout, up close.

Pedal system

The HyDryve II drive uses pedals and underwater fins. Treat the drive and rudder as equipment that needs its own checks, not as ordinary deck fittings.

Angler equipment

Three flush-mounted rod holders, gear tracks and tackle-box or bottle holders are listed.

Seat and storage

The Ergocast G2 seat adjusts, with an eight-inch hatch and separate tankwells for gear.

Where it fits

This is the model to compare when using your legs for propulsion is central to the outing. Think through launch depth, the drive-handling procedure and where removable equipment will travel in your vehicle.

The trade-off

The listed 67 lb weight does not clearly establish the complete launch-ready load with every removable component. Ask for both hull and equipped weights. Carrying a pedal kayak involves more than comparing two headline numbers.

Reference specifications

Reference SKU
KRP11P104-00
Seating layout
Sit On Top
Paddlers
1
Propulsion
Pedal (HyDryve II)
Length
10 ft 6 in / 320 cm
Width
34 in / 86.4 cm
Published weight*
67 lb / 30.4 kg
Maximum carrying load
350 lb / 158.8 kg
Seat
Ergocast G2 adjustable seat
Storage
Front and rear tankwells; 8-inch hatch

Metric conversions are rounded from the published inch and pound figures. Weight is a published reference, not an independent measurement. Confirm included equipment and the load guidance for the exact kayak.

Specification check. The manufacturer narrative and equipment list specify HyDryve II pedal propulsion, but a generic table field says “Paddle.” This page follows the explicit drive description. The 67 lb published weight is not labeled clearly enough to call it hull-only or fully rigged.

Before you choose

Confirm the drive, fins, rudder, controls and seat are included, particularly on a used kayak. Keep a paddle available and follow the drive manual around shallow water and obstacles.

Work through the choosing checklist and plan transport and storage before the first outing.

Source & configuration

Manufacturer specifications: Catch 110HDII. Reference checked September 17, 2026. This profile combines the published configuration with practical comparison notes; it is not a hands-on test report. Model years, retailer packages and accessories can differ.

Two nearby options.